Makers, Farm & Specialty · Printed in Kitchener, ON

3D Printing Filament Labels
spool-ready identification.

A print farm with fifty spools needs to know which one is PETG at 240 degrees and which is PLA at 200. We print spool-side and bag labels on rolls, with material, colour, temperature and your brand, in short runs for filament makers and print farms.

Build your quote ↗ Sizes & options ↓
  • Typical size2 x 4 in spool labels, 3 x 5 in bag labels, 1 in dots
  • Suggested stockMatte or gloss BOPP
  • Typical run250 to 5,000
Custom printed 2Day labels for 3d printing filament labels

2-day turnaround after proof approval · Free proofs · Small runs welcome

Why it matters

Built for 3d printing filament labels.

01

Specs at a glance

Print material, nozzle and bed temperatures, diameter and colour name where the user will see them without unwrapping the spool.

02

Colour swatches that match

A printed colour dot helps customers pick, though printed colour is a guide, not an exact match for the plastic.

03

Rolls for production

Apply labels quickly to spools and vacuum bags as you pack, using roll labels in the size you set.

04

Reorder in two days

When a filament sells out, a quick label reorder keeps the next production batch moving.

How to spec your 3d printing filament labels

Choose roll labels in a rectangle that fits the flat area of your spool, include material and temperature info, and use matte stock so the type stays readable. Start with 250 labels per colour and size.

Make the artwork work

Put the material (PLA, PETG, ABS) in the largest type and a colour dot beside it. Keep temperature ranges in a simple two-line block.

Ready to price it? Open the quote builder below, upload your artwork for a free proof, or browse all label industries and label shapes.

Shapes & finishes

Our picks for this product.

Shapes to start with

Rectangle labels The classic front panel for bottles, jars and boxes. Circle labels Round seals, lids and badges that centre cleanly. Square labels Compact, balanced faces for small packs and tins.

Materials & finishes

Matte BOPP Soft, low-glare finish that reads as understated and premium. Gloss BOPP Bright, saturated colour with a wipe-clean surface. Clear labels A no-label look that lets the product or glass show through.

All 2Day labels are waterproof BOPP printed on HP Indigo and cut in-house. See all 12 label shapes →

Instant pricing

Price your
labels.

Your shape and stock are preselected for this industry. Change anything, upload artwork, and add to cart when the estimate looks right. Free proof, 2-day turnaround after approval.

Your live proof 2 × 2 in

Your proof appears here once you upload artwork

We’ll show your artwork with the die line (cut path) on top so you can size, move and rotate it.

Drag to move · corner handles resize · top handle rotates. The flashing line is where we cut.

Build your label Instant estimate
01 / 03
Label type
Material & finish
Lamination Optional protective film over the print — separate from the material above
Finished size Enter width × height (inches or cm)
Quantity Pick a quantity or choose Custom
Artwork file Optional — you can send it after ordering
↑
Drop artwork or browse PNG, JPG, WEBP, PDF, AI or EPS · 50 MB max · 150 DPI minimum
Estimated total $177.65 $0.711 each

Free proof · Free artwork help · Standard shipping included · 2-day production after proof approval

3D Printing Filament Labels FAQ

Common
questions.

Can I print temperature charts and QR codes?+

Yes, include them in your artwork. Keep QR codes large with good contrast and test scanning on your proof so customers can reach your data sheet.

Can labels go in a heated enclosure?+

Heat can affect any adhesive. Standard BOPP is not rated by us for hot enclosures, so test labels in your actual dry box or enclosure conditions.

What size works on a spool side?+

Many spool labels are about 2 x 4 in, but spool designs vary. Measure the flat area, leave room around the hub, and share the size with us at the proof stage.